BENCHMARK
HARDWOOD
FLOORING INC.
What to
Expect…
We will arrange access and time when job will start. It takes typically 3-4 days for a sand and finish job. Of course, there are variances depending on specifics of job. Room(s) will need to be cleared of all furniture, wall hangings, etc.
It is important to keep room temperatures at approximately 70 degrees Fahrenheit and humidity low. Failure to do this will cause wood to expand with humidity level not allowing for ideal wood installation.
After floors are installed the sanding process will begin. We need electrical access of a 220v (30 amp) to run our large sanding machines. This is usually a dryer outlet size. Wood will be stained; then first coat of sealer applied; followed up with 2 additional protective coats. Dry times depend on product you choose; oil based finish takes 8-12 hours for each coat to dry; however humidity can sometimes increase dry times. Water based finishes take 2-4 hours to dry (but is a slight cost increase). It is very important not to have foot traffic on floors during this process. Doing so can affect the outcome of finish.
Should this be a remodel, ensure that other contractors are scheduled outside of the 3-4 day process of your hardwood flooring project. If you’re planning other construction projects after hardwoods are installed it it important you protect your hardwood floors while other trades are working in these same areas.
After final coat of finish totally dries (not tacky in anyway) you may move furniture back in place. We recommend using felt covers on all furniture legs. Do not scoot or drag objects across floor. It’s recommended not putting rugs or extremely heavy furniture on freshly finished hardwood for 30 days until finish has fully cured.
Pre-finished Floors and Laminates: There are no down times with these applications except for the installation itself. However, the same protective measures mentioned above apply; with exception of finish curing times.
Painting & Touch up: We try to be extremely careful during the process, however, it might be necessary to touch up some paint after work is completed.
Maintenance is the key to lasting beauty of your wood floors. With the right care your hardwood floor will last a lifetime.
Contact us today to order floor care products!
- It’s important to use felt protectors on bottom of all furniture.
- Dragging furniture across hardwoods will damage finish.
- High heels can cause indentions and scratches in floor.
- Don’t pull heavy appliances out without protection underneath.
- Place mats or rugs in front of doorways to help catch dirt & grit. Shake & clean underneath regularly.
- Wipe up food and drink spills as soon as you notice them.
- Vacuum or dust mop weekly to keep grit & dirt off floor; always after a big event.
- It’s best to use recommended floor cleaner for moping.
- Keep pets’ nails trimmed; however, large dogs can scratch floors.
- Keep drapes pulled during direct sunlight on hardwood floors.
- Do not use: Wet mops, ammonia, vinegar & water, windex, dust or furniture cleaners, any product with wax or oil in it.
- Your best bet us to use recommended hardwood floor cleaners.
- Wood expands and contracts with humidity. Wood is most stable at 40% relative humidity. We recommend using a dehumidifier during humid months.
Maintenance
of Hardwood Floors
Here are some helpful tips:
